JNCASR team develops novel material to convert waste heat into electricity

Kanishka Biswas (right)-Optimized
The calculated efficiency of the new material to convert heat into electricity is 14%, say Kanishka Biswas (right) and Subhajit Roychowdhury.

JNCASR scientists have developed a novel material — silver copper telluride — that can be used as a thermoelectric material as it has poor thermal conductivity but good electrical conductivity. With a calculated efficiency of 14%, the new material can be used for converting waste heat into electricity.

A novel compound that exhibits poor thermal conductivity in the 25-425 degree C range but shows good electrical conductivity has been developed by a team of researchers led by Dr. Kanishka Biswas from Bengaluru’s Jawaharlal Nehru Centre for Advanced Scientific Research (JNCASR). The compound, silver copper telluride (AgCuTe), shows promise as a thermoelectric material for converting waste heat into electricity.

Since nearly 65% of the utilized energy is wasted as heat, the focus is on developing materials that exhibit good thermoelectric property with both glass- and metal-like properties. Potential applications of the thermoelectric technology are in automobile industry, chemical, thermal and steel power plants where large quantities of heat are wasted.

Due to the low thermal conductivity of the material developed by JNCASR, one end of the 8 mm-long rod that is contact with waste heat remains hot while the other end maintains cold temperature. The temperature difference is essential for the generation of electrical voltage. At the same time, the material exhibits good electrical conductivity like metal. The results were published in the journal Angewandte Chemie.

How the poor thermal conductivity arises

In the AgCuTe material, the silver atoms (cation) are weekly bound giving rise to poor thermal conductivity due to the slow vibration of the lattice (soft lattice). At high temperatures, copper in the material further lowers the thermal conductivity along with silver. “Since the silver lattice vibrates slowly, it provides record low thermal conduction of 0.35 W per metre per Kelvin, which is actually close to the glass,” Dr. Biswas says.

“Both cations [silver and copper] contribute to low thermal conductivity but silver contributes more. Over 170 degree C, both silver and copper ions flow like liquid within the rigid tellurium sublattice, thereby reducing the thermal conductivity to the level of glass without affecting the hole (electrical carrier) transport,” says Subhajit Roychowdhury from JNCASR and first author of the paper.

In contrast, the tellurium atoms (anion) are strongly bound and the lattice is very rigid.  The strongly-bound tellurium provides a conduction channel for holes thus rendering good electrical conductivity as seen in metals.

Combination of glass and metal

“By combining silver and copper with tellurium we have made our material as a combination of glass and metal — poor thermal conductivity and good electrical conductivity,” Dr. Biswas says.

“Silver telluride does not have good thermoelectric property because it has higher thermal conductivity than our material,” says Roychowdhury.

It is a challenging task to have glassy and metallic properties in a single material, which is the fundamental challenge in the field of thermoelectrics. “We addressed this challenge through structural chemistry by creating a bonding hierarchy in the material,” Dr. Biswas says.

The calculated efficiency to convert heat into electricity is 14% for the new material developed by JNCASR researchers. The lead telluride (PbTe) has higher efficiency of 18%. “But unlike lead telluride that contains lead, which is toxic, our material is lead-free,” he adds. The theoretical calculation to know the electronic structure was done in collaboration with Prof. Umesh V. Waghmare of JNCASR and coauthor of the paper.

“We are trying to increase the efficiency by doping with different cations and anions,” Dr. Biswas says.

Published in The Hindu on March 3, 2018

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s