IIT Madras designs room temperature sodium sulphur battery

Ramaprabhu-Optimized

IIT Madras researchers have fabricated a new sodium sulphur battery that can be operated at room temperature and not at 300 degree C as is the case now. They achieved higher charge storage capacity and 83% retention of capacity even at the end of 500 cycles.

While conventionally sodium sulphur batteries require very high temperature (300 degree C) for operation, researchers at the Indian Institute of technology (IIT) Madras have designed a new sodium sulphur battery that can be operated at room temperature. By operating the battery at room temperature, the team was able to achieve higher charge storage capacity (technically called as specific capacity) and nearly zero self discharge when the battery is not being used.

While high temperature sodium sulphur batteries have charge storage capacity of about 558 mAh per gram, the battery designed by the IIT Madras team was able to achieve as much as 1,034 mAh per gram at a current density of 50 mA per gram.

The battery also showed 83% retention of capacity even at the end of 500 cycles of charging and discharging. To assess the capacity retention, the researchers used higher current density of 500 mA per gram. “The charge storage capacity was 650 mAh per gram to start with and after 100 cycles it reduced to 570 mAh per gram, at the end of 500 cycles, the charge storage capacity was 499 mAh per gram,” says Ajay Piriya from IIT Madras and first author of a paper published in the journal Advanced Materials Interfaces.

How room temperature operation became possible

The first step that the team led by Prof. Ramaprabhu Sundara from the Department of Physics at IIT Madras took to operate the battery at room temperature was to change the electrolyte used. Conventionally, sodium sulphur batteries use a solid electrolyte (sodium beta alumina), which by default reduces the diffusion of sodium ions from the anode to the cathode at room temperature. It is to increase the diffusion of sodium ions that the temperature is raised to about 300 degree C.

So in place of a solid electrolyte the researchers used a glass fibre separator soaked in ether-based electrolyte that allows the battery to be operated at room temperature.

“Changing the electrolyte alone is not sufficient to improve battery performance as there are other problems with sodium sulphur batteries,” says Prof. Sundara. Sodium is supposed to react with sulphur and produce stable sodium sulphide through intermediate steps. Each of the intermediate step produces different sodium polysuphides. “The intermediate sodium polysuphides are unstable and get dissolved into the electrolyte. The dissolved polysuphides cause twin problems that reduce the capacity and durability of the battery,” he explains.

Addressing the twin problem

The first problem is the net loss in the cathode sulphur as the amount of polysuphides getting dissolved into the electrolyte increases. In addition, the dissolved polysuphides move towards the anode and form a coating over it. This reduces the performance of the battery.

To address the twin problem, the team added a shielding layer very close to the cathode. The shielding layer is made of white graphite mixed in a polymer matrix.

“The polymer allows the sodium ions to pass through while the white graphite added to the polymer matrix prevents the migration of polysuphides to the anode,” says Prof. Kamaraj Muthusamy from the Department of Metallurgical and Materials Engineering at IIT Madras and a co-author of the paper. The boron and nitrogen present in the layered structure of the white graphite act as binding sites for the polysuphides. The polysuphides that are chemically bound by the polymer composite react with sodium and produce sodium sulphide.

“Nearly all of the sulphur gets converted into sodium suphide when we used the shielding layer between the cathode and the separator,” Ms. Piriya says. “Since the migration of the polysuphides to the sodium anode is prevented by the shielding layer, self-discharge of the battery is significantly reduced.”

Self-discharge prevented

The battery was tested for self-discharge by measuring the open circuit potential of a fully charged battery for 16 continuous days. They found the potential remaining constant at 2.35 volt when the shielding layer was used; the voltage dropped without the shielding layer.

While conductive carbons are added to the sulphur to make it electrically conductive in conventional sulphur batteries, the researchers used partially exfoliated multiwalled carbon nanotubes.

Published in The Hindu on January 11, 2020

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.